OpenVPN云免流服务器搭建
寒假的时候博主用上了4G手机了,开学来发现以前开的18元300M的流量经常不够用,想到初中时就已经有的免流,于是查了下资料,发现现在主流免流用的是OpenVPN方式了,这里做下记录搭建OpenVPN云免流服务器的过程
使用的系统:CentOS 7.1 x64
注:此方法中使用的免流代码已失效
一、搭建过程
- 添加拓展包源
yum install epel-release
- 安装OpenVPN
yum install openvpn easy-rsa -y
- 配置OpenVPN
cp /usr/share/doc/openvpn-*/sample/sample-config-files/server.conf /etc/openvpn
vi /etc/openvpn/server.conf
这里是我修改后的
#################################################
# Sample OpenVPN 2.0 config file for #
# multi-client server. #
# #
# This file is for the server side #
# of a many-clients <-> one-server #
# OpenVPN configuration. #
# #
# OpenVPN also supports #
# single-machine <-> single-machine #
# configurations (See the Examples page #
# on the web site for more info). #
# #
# This config should work on Windows #
# or Linux/BSD systems. Remember on #
# Windows to quote pathnames and use #
# double backslashes, e.g.: #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
# #
# Comments are preceded with '#' or ';' #
#################################################
# Which local IP address should OpenVPN
# listen on? (optional)
;local a.b.c.d
# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one. You will need to
# open up this port on your firewall.
port 443
# TCP or UDP server?
proto tcp
;proto udp
# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one. On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap
# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key). Each client
# and the server must have their own cert and
# key file. The server and all clients will
# use the same ca file.
#
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys. Remember to use
# a unique Common Name for the server
# and each of the client certificates.
#
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
ca ca.crt
cert server.crt
key server.key # This file should be kept secret
# Diffie hellman parameters.
# Generate your own with:
# openssl dhparam -out dh2048.pem 2048
dh dh2048.pem
# Network topology
# Should be subnet (addressing via IP)
# unless Windows clients v2.0.9 and lower have to
# be supported (then net30, i.e. a /30 per client)
# Defaults to net30 (not recommended)
;topology subnet
# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 10.8.0.0 255.255.255.0
# Maintain a record of client <-> virtual IP address
# associations in this file. If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt
# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface. Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0. Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients. Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
# Configure server mode for ethernet bridging
# using a DHCP-proxy, where clients talk
# to the OpenVPN server-side DHCP server
# to receive their IP address allocation
# and DNS server addresses. You must first use
# your OS's bridging capability to bridge the TAP
# interface with the ethernet NIC interface.
# Note: this mode only works on clients (such as
# Windows), where the client-side TAP adapter is
# bound to a DHCP client.
;server-bridge
# Push routes to the client to allow it
# to reach other private subnets behind
# the server. Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
;push "route 192.168.10.0 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"
# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).
# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
;client-config-dir ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
# iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN. This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.
# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
# ifconfig-push 10.9.0.1 10.9.0.2
# Suppose that you want to enable different
# firewall access policies for different groups
# of clients. There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
# group, and firewall the TUN/TAP interface
# for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
# modify the firewall in response to access
# from different clients. See man
# page for more info on learn-address script.
;learn-address ./script
# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# or bridge the TUN/TAP interface to the internet
# in order for this to work properly).
push "redirect-gateway def1 bypass-dhcp"
# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses. CAVEAT:
# http://openvpn.net/faq.html#dhcpcaveats
# The addresses below refer to the public
# DNS servers provided by opendns.com.
push "dhcp-option DNS 114.114.114.114"
push "dhcp-option DNS 114.114.115.115"
# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
;client-to-client
# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names. This is recommended
# only for testing purposes. For production use,
# each client should have its own certificate/key
# pair.
#
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn
# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120
# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
#
# Generate with:
# openvpn --genkey --secret ta.key
#
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
;tls-auth ta.key 0 # This file is secret
# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
;cipher BF-CBC # Blowfish (default)
;cipher AES-128-CBC # AES
;cipher DES-EDE3-CBC # Triple-DES
# Enable compression on the VPN link.
# If you enable it here, you must also
# enable it in the client config file.
comp-lzo
# The maximum number of concurrently connected
# clients we want to allow.
;max-clients 100
# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
#
# You can uncomment this out on
# non-Windows systems.
user nobody
group nobody
# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun
# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status openvpn-status.log
# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it. Use one
# or the other (but not both).
;log openvpn.log
;log-append openvpn.log
# Set the appropriate level of log
# file verbosity.
#
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
verb 3
# Silence repeating messages. At most 20
# sequential messages of the same message
# category will be output to the log.
;mute 20
- 生成证书
mkdir -p /etc/openvpn/easy-rsa/keys
cp -rf /usr/share/easy-rsa/2.0/* /etc/openvpn/easy-rsa
vi /etc/openvpn/easy-rsa/vars
这是我修改后的
# easy-rsa parameter settings
# NOTE: If you installed from an RPM,
# don't edit this file in place in
# /usr/share/openvpn/easy-rsa --
# instead, you should copy the whole
# easy-rsa directory to another location
# (such as /etc/openvpn) so that your
# edits will not be wiped out by a future
# OpenVPN package upgrade.
# This variable should point to
# the top level of the easy-rsa
# tree.
export EASY_RSA="`pwd`"
#
# This variable should point to
# the requested executables
#
export OPENSSL="openssl"
export PKCS11TOOL="pkcs11-tool"
export GREP="grep"
# This variable should point to
# the openssl.cnf file included
# with easy-rsa.
export KEY_CONFIG=`$EASY_RSA/whichopensslcnf $EASY_RSA`
# Edit this variable to point to
# your soon-to-be-created key
# directory.
#
# WARNING: clean-all will do
# a rm -rf on this directory
# so make sure you define
# it correctly!
export KEY_DIR="$EASY_RSA/keys"
# Issue rm -rf warning
echo NOTE: If you run ./clean-all, I will be doing a rm -rf on $KEY_DIR
# PKCS11 fixes
export PKCS11_MODULE_PATH="dummy"
export PKCS11_PIN="dummy"
# Increase this to 2048 if you
# are paranoid. This will slow
# down TLS negotiation performance
# as well as the one-time DH parms
# generation process.
export KEY_SIZE=2048
# In how many days should the root CA key expire?
export CA_EXPIRE=3650
# In how many days should certificates expire?
export KEY_EXPIRE=3650
# These are the default values for fields
# which will be placed in the certificate.
# Don't leave any of these fields blank.
export KEY_COUNTRY="US"
export KEY_PROVINCE="CA"
export KEY_CITY="SanFrancisco"
export KEY_ORG="Fort-Funston"
export KEY_EMAIL="[email protected]"
export KEY_OU="MyOrganizationalUnit"
# X509 Subject Field
export KEY_NAME="server"
# PKCS11 Smart Card
# export PKCS11_MODULE_PATH="/usr/lib/changeme.so"
# export PKCS11_PIN=1234
# If you'd like to sign all keys with the same Common Name, uncomment the KEY_CN export below
# You will also need to make sure your OpenVPN server config has the duplicate-cn option set
export KEY_CN="openvpn.lanyus.com"
继续执行命令
cp /etc/openvpn/easy-rsa/openssl-1.0.0.cnf /etc/openvpn/easy-rsa/openssl.cnf
cd /etc/openvpn/easy-rsa
source ./vars
./clean-all
./build-ca
./build-key-server server
./build-dh
cd /etc/openvpn/easy-rsa/keys
cp dh2048.pem ca.crt server.crt server.key /etc/openvpn
cd /etc/openvpn/easy-rsa
./build-key client
./build-key client1
这里注意下,如果你的服务器只有你一个用户,那么可以不执行./build-key client1,如果是2个用户,则需要执行./build-key client1,3个用户则需要执行./build-key client2,依次类推,这样为每个用户生成1个证书
- 路由
yum install iptables-services -y
systemctl mask firewalld
systemctl enable iptables
systemctl stop firewalld
systemctl start iptables
iptables --flush
iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE
iptables-save > /etc/sysconfig/iptables
vi /etc/sysctl.conf
添加net.ipv4.ip_forward = 1到文件顶部
systemctl restart network.service - 启动OpenVPN
systemctl -f enable [email protected]
systemctl start [email protected] - 配置客户端
复制这三个文件到电脑中
/etc/openvpn/easy-rsa/keys/ca.crt
/etc/openvpn/easy-rsa/keys/client.crt
/etc/openvpn/easy-rsa/keys/client.key
新建client.ovpn,内容为
client
dev tun
proto tcp
remote 服务器IP 443
resolv-retry infinite
nobind
persist-key
persist-tun
comp-lzo
verb 3
########免流代码########
http-proxy-option EXT1 "POST http://rd.go.10086.cn"
http-proxy-option EXT1 "GET http://rd.go.10086.cn"
http-proxy-option EXT1 "X-Online-Host: rd.go.10086.cn"
http-proxy-option EXT1 "POST http://rd.go.10086.cn"
http-proxy-option EXT1 "X-Online-Host: rd.go.10086.cn"
http-proxy-option EXT1 "POST http://rd.go.10086.cn"
http-proxy-option EXT1 "Host: rd.go.10086.cn"
http-proxy-option EXT1 "GET http://rd.go.10086.cn"
http-proxy-option EXT1 "Host: rd.go.10086.cn"
http-proxy 10.0.0.172 80
########免流代码########
<ca>
ca.crt的内容粘贴到这里
</ca>
<cert>
client.crt的内容粘贴到这里
</cert>
<key>
client.key的内容粘贴到这里
</key>
注意:需要修改服务器IP为自己的服务器,ca、cert、key的内容需要按里面要求粘贴进去
默认的免流代码为移动的代码
可以修改为其他的
联通
http-proxy-retry
http-proxy 10.0.0.172 80
http-proxy-option EXT1 "X-Online-Host: wap.10010.com"
http-proxy-option EXT2 "Host: wap.10010.com"
电信
http-proxy-retry
http-proxy 10.0.0.200 80
http-proxy-option EXT1 "X-Online-Host: ltetp.tv189.com"
http-proxy-option EXT2 "Host: ltetp.tv189.com"
移动-默认
http-proxy-retry
http-proxy 10.0.0.172 80
http-proxy-option EXT1 "POST http://rd.go.10086.cn"
http-proxy-option EXT1 "GET http://rd.go.10086.cn"
http-proxy-option EXT1 "X-Online-Host: rd.go.10086.cn"
http-proxy-option EXT1 "POST http://rd.go.10086.cn"
http-proxy-option EXT1 "X-Online-Host: rd.go.10086.cn"
http-proxy-option EXT1 "POST http://rd.go.10086.cn"
http-proxy-option EXT1 "Host: rd.go.10086.cn"
http-proxy-option EXT1 "GET http://rd.go.10086.cn"
http-proxy-option EXT1 "Host: rd.go.10086.cn"
移动-彩信
http-proxy-retry
http-proxy 10.0.0.172 80
http-proxy-option EXT1 "POST http://mmsc.monternet.com"
http-proxy-option EXT1 "GET http://mmsc.monternet.com"
http-proxy-option EXT1 "X-Online-Host: mmsc.monternet.com"
http-proxy-option EXT1 "CMCC: mmsc.monternet.com"
使用时需要手机修改接入点为wap接入点,并把里面填写的代理服务器及端口删除掉,wap接入点有时会修改网页信息,可以考虑自己搭建HTTP代理,以使用net接入点
- 安装Android OpenVPN客户端
下载地址在这里:http://www.coolapk.com/apk/net.openvpn.openvpn
然后点击右上角,选择 Import Profile from SD card,导入刚才修改好的client.ovpn
点击Connect即可
二、免流原理
移动公司为了用户方便,设置了浏览部分移动的网站不需要花流量,而移动公司识别访问的网址是否为这部分网址时,出现了问题,导致识别错误,主要是这个X-Online-Host字段上的问题。OpenVPN免流时,实际会先通过HTTP代理,然后再建立VPN,在建立HTTP代理时,让移动公司识别我们是和移动的免流网站建立的代理,这样就能免流了。
作者你好,我现在是在国外,有人在卖这个免流包,我花钱买了一个账号密码,然后看到他是用open VPN来免流,所以我想问下,只有.ovpn的文件的情况下,能不能自己做个免流服务器? 我把他的.ovpn的文件用记事本打开后有一段IP地址和端口号。 我的QQ是721193142, 如果可以的话请加我。
@yang
其实到处都有卖,免流要有一台服务器才行
@ilanyu
我知道要租服务器,我是在问免流代码可以从那个配置文件中找到吗?
谢谢你
@Yang
可以
@ilanyu加一下你微信可以吗,想搭建一个,有偿。
你好,我租了一个网易蜂窝,然后修改了服务器地址,可还是连不上,能帮我看下吗?
“client dev tunproto tcp remote apps.mtnplay.mobi.xyunaa.publicvm.com 443
http-proxy 196.11.240.251 8080resolv-retry infinite nobind
persist-keypersist-tunauth-user-passns-cert-type serverredirect-gatewaykeepalive 20 60comp-lzoverb 3mute 20route-method exeroute-delay 2”
这是我买的那份配置文件
这是我现在用的
“client dev tun
proto tcpremote 59.111.96.148 443http-proxy 196.11.240.251 8080resolv-retry infinitenobindpersist-keypersist-tunauth-user-passns-cert-type serverredirect-gatewaykeepalive 20 60comp-lzoverb 3mute 20route-method exeroute-delay 2
########免流代码########
sbwml
admin
remote 59.111.96.148 3389 tcp-clientresolv-retry infinitenobindpersist-keypersist-tunpush route 8.8.8.8 8.8.4.4”
是网易蜂巢现在不能用了还是我代码出错了?
谢谢了
@Yang
我记得之前在哪看到说网易的封了那几个端口的,我用的腾讯的,没问题
我又回来了,还是没弄好。。。
2016-08-16 07:08:00 EVENT: RESOLVE
2016-08-16 07:08:00 Contacting 196.11.240.251:8080 via HTTP Proxy
2016-08-16 07:08:00 EVENT: WAIT_PROXY
2016-08-16 07:08:00 SetTunnelSocket returned 1
2016-08-16 07:08:00 EVENT: WAIT
2016-08-16 07:08:00 TO PROXY: CONNECT apps.mtnplay.mobi.thetop5.tk:443 HTTP/1.0
kangml: 127.0.0.1:440
POST apps.mtnplay.mobi.thetop5.tk
Host: apps.mtnplay.mobi.thetop5.tk / HTTP/1.1
2016-08-16 07:08:02 FROM PROXY: HTTP/1.0 503 Service Unavailable
Content-Type: text/html
Proxy-Connection: close
Connection: close
Content-Length: 212
2016-08-16 07:08:02 TCP recv EOF
2016-08-16 07:08:02 Proxy Error: on 196.11.240.251:8080: HTTP proxy server could not connect to OpenVPN server
2016-08-16 07:08:02 Client terminated, restarting in 2...
2016-08-16 07:08:03 EVENT: DISCONNECTED
2016-08-16 07:08:03 Raw stats on disconnect:
BYTES_OUT : 158
PACKETS_OUT : 1
2016-08-16 07:08:03 Performance stats on disconnect:
CPU usage (microseconds): 11784
Network bytes per CPU second: 13408
Tunnel bytes per CPU second: 0
2016-08-16 07:08:03 ----- OpenVPN Stop -----
这是我新弄的openvpn的配置文件的连接日志
另外我买的配置文件里remote后面是个域名,要是把那个域名改成配套的IP地址就不行了,所以我现在也注册了个免费域名
这是我现在在用的配置
可以用的
client
dev tun
proto tcp
remote apps.mtnplay.mobi.vpn.mybeyond.top 443 这个是他的服务器,前面那段apps.mtnplay.mobi 是个免流网站
http-proxy 196.11.240.251 8080 这是那个运营商的一个dns 服务器
resolv-retry infinite
nobind
persist-key
persist-tun
auth-user-pass
ns-cert-type server
redirect-gateway
keepalive 20 60
comp-lzo
verb 3
mute 20
route-method exe
route-delay 2
这是我自己写的配置文件
client
dev tun
proto tcp
remote apps.mtnplay.mobi.thetop5.tk 443
########免流代码########
http-proxy 196.11.240.251 8080
http-proxy-option EXT1 kangml 127.0.0.1:440
http-proxy-option EXT1 "POST http://apps.mtnplay.mobi.thetop5.tk" 我试了把“http://”删了,也没用
http-proxy-option EXT1 "Host: http://apps.mtnplay.mobi.thetop5.tk / HTTP/1.1
########免流代码########
resolv-retry infinite
nobind
persist-key
persist-tun
setenv IV_GUI_VER "de.blinkt.openvpn 0.6.17"
push route 114.114.114.144 114.114.115.115
machine-readable-output
connect-retry-max 5
connect-retry 5
resolv-retry 60
auth-user-pass
ns-cert-type server
comp-lzo
verb 3
那个openvpn界面是提示说等待服务器,可是一直连不上。打开日志就是刚刚那个
这是他的配置文件的连接日志
2016-08-16 07:23:24 ----- OpenVPN Start -----
OpenVPN core 3.0.11 ios arm64 64-bit built on Apr 15 2016 14:13:50
2016-08-16 07:23:24 Frame=512/2048/512 mssfix-ctrl=1250
2016-08-16 07:23:24 UNUSED OPTIONS
5 [resolv-retry] [infinite]
6 [nobind]
7 [persist-key]
8 [persist-tun]
14 [verb] [3]
15 [mute] [20]
16 [route-method] [exe]
17 [route-delay] [2]
2016-08-16 07:23:24 EVENT: RESOLVE
2016-08-16 07:23:24 Contacting 196.11.240.251:8080 via HTTP Proxy
2016-08-16 07:23:24 EVENT: WAIT_PROXY
2016-08-16 07:23:24 SetTunnelSocket returned 1
2016-08-16 07:23:24 EVENT: WAIT
2016-08-16 07:23:24 TO PROXY: CONNECT apps.mtnplay.mobi.vpn.mybeyond.top:443 HTTP/1.0
Host: apps.mtnplay.mobi.vpn.mybeyond.top
2016-08-16 07:23:24 FROM PROXY: HTTP/1.1 200 Connection established
2016-08-16 07:23:24 Connecting to [apps.mtnplay.mobi.vpn.mybeyond.top]:443 (196.11.240.251) via TCPv4-via-HTTP
2016-08-16 07:23:24 EVENT: CONNECTING
2016-08-16 07:23:24 Tunnel Options:V4,dev-type tun,link-mtu 1544,tun-mtu 1500,proto TCPv4_CLIENT,comp-lzo,cipher BF-CBC,auth SHA1,keysize 128,key-method 2,tls-client
2016-08-16 07:23:24 Creds: Username/Password
2016-08-16 07:23:24 Peer Info:
IV_GUI_VER=net.openvpn.connect.ios 1.0.7-199
IV_VER=3.0.11
IV_PLAT=ios
IV_NCP=2
IV_TCPNL=1
IV_PROTO=2
IV_LZO=1
2016-08-16 07:23:25 VERIFY OK: depth=1
cert. version : 3
serial number : 92:25:D8:7D:E7:B6:42:A3
issuer name : C=US, ST=CA, L=SanFrancisco, O=Fort-Funston, OU=changeme, CN=changeme, ??=changeme, [email protected]
subject name : C=US, ST=CA, L=SanFrancisco, O=Fort-Funston, OU=changeme, CN=changeme, ??=changeme, [email protected]
issued on : 2016-04-06 15:25:44
expires on : 2026-04-04 15:25:44
signed using : RSA with SHA1
RSA key size : 1024 bits
basic constraints : CA=true
2016-08-16 07:23:25 VERIFY OK: depth=0
cert. version : 3
serial number : 01
issuer name : C=US, ST=CA, L=SanFrancisco, O=Fort-Funston, OU=changeme, CN=changeme, ??=changeme, [email protected]
subject name : C=US, ST=CA, L=SanFrancisco, O=Fort-Funston, OU=changeme, CN=server, ??=changeme, [email protected]
issued on : 2016-04-06 15:25:49
expires on : 2026-04-04 15:25:49
signed using : RSA with SHA1
RSA key size : 1024 bits
basic constraints : CA=false
cert. type : SSL Server
key usage : Digital Signature, Key Encipherment
ext key usage : TLS Web Server Authentication
2016-08-16 07:23:25 SSL Handshake: TLSv1.0/TLS-DHE-RSA-WITH-3DES-EDE-CBC-SHA
2016-08-16 07:23:25 Session is ACTIVE
2016-08-16 07:23:25 EVENT: GET_CONFIG
2016-08-16 07:23:25 Sending PUSH_REQUEST to server...
2016-08-16 07:23:25 OPTIONS:
0 [redirect-gateway]
1 [redirect-gateway]
2 [dhcp-option] [DNS] [114.114.114.114]
3 [dhcp-option] [DNS] [114.114.115.115]
4 [route] [192.1.0.1]
5 [topology] [net30]
6 [ping] [10]
7 [ping-restart] [120]
8 [ifconfig] [192.1.1.142] [192.1.1.141]
2016-08-16 07:23:25 PROTOCOL OPTIONS:
cipher: BF-CBC
digest: SHA1
compress: LZO
peer ID: -1
2016-08-16 07:23:25 EVENT: ASSIGN_IP
2016-08-16 07:23:25 Connected via tun
2016-08-16 07:23:25 EVENT: CONNECTED [email protected]:443 (196.11.240.251) via /TCPv4-via-HTTP on tun/192.1.1.142/
2016-08-16 07:23:25 LZO-ASYM init swap=0 asym=0
2016-08-16 07:23:25 SetStatus Connected
拜托帮我看一下吧,是哪里出错了。。
@Yang
http-proxy 196.11.240.251 8080这个表示HTTP代理服务器及端口好吧,cmwap接入点的话,就应该是10.0.0.172 80,或者你也可以自己搭建个HTTP代理服务器
@ilanyu
我已经租了一个腾讯服务器了, 是用康师傅搭建的。
我现在是真不知道哪里出错了
我在的国家没有分cmWAP和cmnet
那个配置文件是我基于康师傅自动生成的联通免流配置文件改的。
http-proxy 196.11.240.251 8080这个表示HTTP代理服务器及端口
这个IP地址,是从运营商发来的接入点设置里dns代理的默认设置。所以我也不懂。
我之前找了一个人帮忙,他把这个http-proxy后面的IP地址改成我的服务器IP地址,我用wifi时可以连接但是空卡(这边都是预付费的,先充钱再用)就不行了。 而我买的那个配置文件我用空卡可以连,wifi就连不上了……
@Yang
建议你先百度学学怎么用openvpn搭建翻墙vpn吧,免流是在这个的基础上来的,这个搞不懂的话,也不会搞懂免流的
博主,修改配置的时候复制你的可以吗
@barry
在我的基础上也要做做修改的
按照你写的一步步做,最后client.crt内容为空
我其他都成功了只是最后的免流文件有问题,现在也可以连接VPN,但不能实现免流,如果,知道某个网站流量不计费怎么如何把它配置到免流文件里
@乐宝
成都移动表示已失效
@ilanyu 大神,你好
我按照你的教程,手机能正常连接到openvpn server 也有流量。
但是手机就是打不开任何网页,我已经将免流代码修改成自己区域的运营商网站
请问如何拍错,谢谢
@bruce我觉得你可能是vpn server iptables 设置问题
@killua iptables 是复制你的代码,然后我也试过关掉防火墙,还是不行呀。
@bruce不是我的代码。。。
博主你好有几个问题想请教一下
1、remote的地址是openvpn的地址端口吗?
2、proxy-option 是vps的http 代理服务器的地址和端口?
3、想了解一下手机消息的流程是
app->openvpnclient->httpproxy->openvpnserver->目标web吗?计费系统是在哪儿阶段生效的?openvpnclient ->httpproxy是这个阶段吗?
自己搭了一个 没成功,没找到什么原因。
您好,按照您的方法,我已搭建openvpn成功,我觉得在这个的过程中,最主要的还是配置文件中,免流host的地址。请问您是如何找到免流host的呢?
@Xushengxian
主要的是模拟, 不是免流host, 只要用浏览器打开能免流的, 就能用来搞免流
请教这里有高手知道怎么在美国装使用免流服务器服务吗?如有请联系我,收费没问题
Hy there, every thing is in chinies here. I am not able to read and understand. I am from south africa. looking for free vpn settings for mtn network. Please if there any one can assist me.
[email protected] (we can talk in pm too)
非常感谢你的分享,另外我想问下这个是否会负法律责任?
@zchazc
会
照着设置了,根本连不上
已经连上